Details

---

BUY CY2077FZXI https://www.utsource.net/itm/p/4358097.html
CLOCK GEN PROG 8-TSSOP

Parameter	Description	Value	Unit
Operating Voltage	Supply voltage range	2.7 to 5.25	V
Output Current	Maximum output current	100	mA
Operating Temp	Temperature range for operation	-40 to +85	°C
Package Type	Package style	SOIC-8
Mounting Type	Surface mount or through-hole type	Surface Mount
Features	Special features of the component	Low noise, low dropout

Instructions:

1. Power Supply Connection: Ensure the supply voltage is within the specified operating voltage range (2.7V to 5.25V). Connect the input power supply to the VIN pin and GND to the ground.

2. Output Configuration: The output pin (VOUT) should be connected to the load. Make sure the load current does not exceed the maximum output current (100mA).

3. Thermal Considerations: Keep the operating temperature within -40°C to +85°C. If operating in environments near the upper limit, ensure adequate heat dissipation.

4. Capacitor Requirements: Place a bypass capacitor close to the VIN and GND pins to stabilize the input voltage. A typical value of 0.1μF is recommended. For the output, use a capacitor as specified in the datasheet to ensure stability.

5. Handling Precautions: Handle the CY2077FZXI with care to avoid damage from electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

6. Installation: Solder the CY2077FZXI onto the PCB ensuring correct orientation and alignment. Verify all connections post-soldering.

Note: Always refer to the manufacturer's datasheet for detailed specifications and application notes.

(For reference only)