Details

---

BUY CXA7007R-T6 https://www.utsource.net/itm/p/4359588.html

Parameter	Description	Value
Part Number	Unique identifier for the component	CXA7007R-T6
Type	Type of device	RF Amplifier
Frequency Range	Operating frequency range	45 MHz to 6 GHz
Gain	Gain provided by the amplifier	21 dB (Typical)
Noise Figure	Measure of degradation of signal-to-noise ratio	2.8 dB (Typical)
P1dB Compression	Output power at 1 dB compression point	+23 dBm (Typical)
IP3	Third-order intercept point	+38 dBm (Typical)
Supply Voltage	Recommended operating voltage	3.3 V
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Package Type	Type of packaging	TSSOP-6
Manufacturer	Manufacturer of the component	Murata

Instructions:

1. Power Supply Connection: Connect a stable 3.3V power supply to the VCC pin and ensure proper decoupling capacitors are placed close to the power pins.
2. Input and Output Matching: Use appropriate matching networks to achieve optimal performance over the desired frequency range.
3. Biasing: Follow the recommended biasing conditions as per the datasheet to ensure stable operation.
4. Grounding: Ensure a good ground connection for the GND pin to maintain low noise performance.
5. Handling Precautions: Handle with care; this device is sensitive to electrostatic discharge (ESD). Use ESD-safe practices during installation.
6. Installation: Mount on a PCB with adequate heat dissipation if required, especially under high-power conditions.
7. Testing: After installation, verify the performance parameters using calibrated test equipment within the specified frequency range.

For detailed specifications and additional information, refer to the official datasheet from Murata.

(For reference only)