Details

---

BUY FDMS86300 https://www.utsource.net/itm/p/4447277.html
N-Channel PowerTrench? MOSFET 80 V, 42 A, 3.9 m惟 1 FDMS86 300 Datasheets Search Partnumber : Start with "FDMS86 300 " - Total : 55 ( 1/2 Page) NO Part no Electronics Description View Electronic Manufacturer 55 FDMS86101 N-Channel PowerTrench? MOSFET 100 V, 49 A, 8 m? Fairchild Semiconductor 54 FDMS86101

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Drain-Source On-State Resistance	RDS(on)	VGS = 10V, ID = 30A	-	2.5	-	m惟
Continuous Drain Current	ID	TC = 25掳C	-	60	-	A
Pulse Drain Current	IGM	TP = 10渭s, Rep Rate = 10%	-	180	-	A
Gate Threshold Voltage	VGS(th)	ID = 250渭A	1.0	1.7	2.4	V
Input Capacitance	Ciss	VDS = 10V, f = 1MHz	-	2400	-	pF
Total Gate Charge	Qg	VGS = 10V, IDS = 30A	-	95	-	nC
Zero Gate Voltage Drain Current	IDSS	VDS = 10V	-	1	-	渭A
Maximum Junction Temperature	TJ(max)	-	-	-	175	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the FDMS86300 with care to avoid damage to the device.
   • Use appropriate ESD protection measures when handling.

2. Mounting and Assembly:

   • Ensure proper alignment of the component during mounting to avoid misalignment issues.
   • Follow recommended soldering profiles to prevent thermal damage.

3. Electrical Connections:

   • Verify all electrical connections are correct before applying power.
   • Ensure that the gate voltage (VGS) does not exceed the maximum rated value.

4. Thermal Management:

   • Provide adequate heat sinking or cooling solutions if operating near maximum current ratings.
   • Monitor the junction temperature to ensure it remains within safe operating limits.

5. Operating Environment:

   • Operate the device within specified environmental conditions to ensure reliable performance.
   • Protect against moisture and corrosive environments as necessary.

6. Testing:

   • Perform initial testing at lower power levels to verify operation.
   • Use test conditions similar to those listed in the parameter table for accurate measurements.

7. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep components in original packaging until ready for use to protect against static damage.

(For reference only)