Details

---

BUY FODM8071 https://www.utsource.net/itm/p/4467945.html
3.3V/5V Logic Gate Output Optocoupler with High Noise Immunity

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Drain-Source Voltage	VDS	-	-	70	-	V
Gate-Source Voltage	VGS	-	-	卤20	-	V
Continuous Drain Current	IDS	Ta = 25掳C	-	4.8	-	A
Pulse Drain Current	IDP	Tp = 10ms, Duty = 1%, Ta = 25掳C	-	9.6	-	A
Power Dissipation	PD	Ta = 25掳C	-	35	-	W
Junction Temperature	TJ	-	-	-	150	掳C
Storage Temperature	TSTG	-	-55	-	150	掳C
Total Device Height	hT	-	-	1.05	1.2	mm

Instructions for Use:

1. Mounting and Handling:

   • Handle the FODM8071 with care to avoid damage to the leads or body.
   • Ensure that the device is mounted on a heatsink if operating near maximum power dissipation.

2. Electrical Connections:

   • Connect the drain (D) and source (S) terminals according to your circuit design.
   • Apply gate-source voltage (VGS) within the specified limits to control the switching of the device.

3. Thermal Management:

   • Keep the junction temperature (TJ) below the maximum limit of 150掳C to ensure reliable operation.
   • If necessary, use thermal compounds and heatsinks to enhance heat dissipation.

4. Storage and Operating Environment:

   • Store the device in a dry, cool place within the storage temperature range (-55掳C to 150掳C).
   • Avoid exposing the device to excessive humidity or corrosive environments.

5. Safety Precautions:

   • Do not exceed the maximum ratings listed in the parameter table to prevent damage or failure.
   • Ensure proper ventilation when operating the device at high currents or powers.

(For reference only)