Details

---

BUY G2R-2-48VDC https://www.utsource.net/itm/p/4476682.html

Parameter	Description	Value
Product Code	Unique identifier for the product	G2R-2-48VDC
Type	Relay type	SPDT
Coil Voltage	Operating voltage of the relay coil	48 VDC
Coil Power	Power consumption of the relay coil	1.5 W
Coil Resistance	Resistance of the relay coil	1.6 k惟
Contact Form	Configuration of relay contacts	Single Pole, Double Throw (SPDT)
Contact Rating	Maximum current and voltage the contacts can handle	10 A, 250 VAC
Insulation Voltage	Dielectric strength between contacts	1000 Vrms
Operating Temp.	Temperature range for operation	-40掳C to +85掳C
Storage Temp.	Temperature range for storage	-40掳C to +85掳C
Weight	Weight of the relay	50 g
Dimensions	Physical size of the relay	30 x 20 x 15 mm

Instructions:

1. Installation:

   • Ensure that the relay is installed in a well-ventilated area.
   • Mount the relay on a flat surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the control circuit providing 48V DC.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit as required.

3. Operation:

   • Apply the rated coil voltage to activate the relay.
   • Ensure not to exceed the contact rating to avoid damage or premature wear.

4. Maintenance:

   • Periodically inspect connections for tightness and corrosion.
   • Keep the relay clean and free from debris.

5. Safety:

   • Always disconnect power before performing any maintenance.
   • Follow all local electrical codes and regulations.

(For reference only)