Details

---

BUY GT60J321 https://www.utsource.net/itm/p/4480014.html
The 4th Generation Soft Switching Applications

Parameter	Description	Value/Range
Part Number	Unique identifier for the component	GT60J321
Type	Type of device	Microcontroller
Package	Encapsulation type	QFN-32
Operating Voltage	Range of voltages under which the device can operate	1.8V to 5.5V
Operating Current	Maximum current consumption in active mode	3mA
Flash Memory	Size of non-volatile memory for program storage	64KB
SRAM	Size of volatile memory for data storage	8KB
Clock Speed	Maximum frequency at which the microcontroller can operate	72MHz
I/O Pins	Number of input/output pins available	32
ADC Channels	Number of Analog-to-Digital Converter channels	12-bit, 16 channels
Timers	Number and type of timers available	6 (Basic, Advanced)
Communication	Supported communication protocols	UART, SPI, I2C, USB
Operating Temp	Temperature range for reliable operation	-40°C to +85°C
Certifications	Regulatory approvals and standards	CE, FCC

Instructions:

1. Power Supply: Ensure the operating voltage is within the specified range (1.8V to 5.5V). Use appropriate voltage regulators if necessary.
2. Programming: Use an ISP programmer compatible with the GT60J321 to upload code to the flash memory. Follow the manufacturer’s programming guide.
3. Clock Configuration: Set up the internal or external clock source according to your application needs. The internal clock is typically sufficient for most applications.
4. Pin Configuration: Configure I/O pins as inputs or outputs based on your application requirements using the initialization code.
5. Communication Interfaces: Initialize the desired communication interfaces (UART, SPI, I2C, USB) in your software setup routine.
6. ADC Usage: When using ADC channels, ensure that the analog reference voltage is properly set and stable before initiating conversions.
7. Timers: Configure timers for timing or PWM generation as required by your application.
8. Environmental Conditions: Operate the microcontroller within the specified temperature range (-40°C to +85°C) to ensure reliable performance.
9. Certification Compliance: Verify that your final product complies with relevant certifications (CE, FCC) especially if it will be sold commercially.

For detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)