Details

---

BUY GPY0030B-HS011 https://www.utsource.net/itm/p/4483577.html

Parameter	Description
Part Number	GPY0030B-HS011
Type	Photoelectric Sensor
Operating Voltage	10 - 30 VDC
Current Consumption	Max. 40 mA @ 24 VDC
Detection Distance	Adjustable up to 5 m (depending on target reflectivity and ambient conditions)
Response Time	5 ms (typical)
Output Type	NPN open collector
Output Current	Max. 100 mA
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Mounting Thread	M18 x 1.5
Protection Rating	IP67
Wiring Connection	PNP/NPN selectable via jumper

Instructions:

1. Installation: Mount the sensor using the provided M18 x 1.5 thread. Ensure it is securely fastened and aligned with the detection area.
2. Power Supply: Connect the sensor to a power supply within the specified operating voltage range (10 - 30 VDC).
3. Output Configuration: Select the desired output type (PNP or NPN) by adjusting the jumper on the sensor's connector.
4. Adjust Detection Distance: Use the potentiometer on the sensor to adjust the detection distance as required.
5. Testing: Before final installation, test the sensor in the intended environment to ensure it operates correctly under actual conditions.
6. Maintenance: Periodically check the sensor for dirt or obstructions that may affect performance. Clean if necessary using a soft cloth.
7. Environmental Considerations: Ensure the sensor is used within the specified temperature ranges to avoid damage or malfunction.

(For reference only)