Details

---

BUY HCNW2201-000E https://www.utsource.net/itm/p/4493104.html

Parameter	Description	Value
Part Number	Full part identification	HCNW2201-000E
Function	Device function	Hall Effect Switch
Supply Voltage (Vcc)	Operating voltage range	2.5V to 5.5V
Output Type	Logic output type	Digital Output
Sensitivity	Magnetic field required to activate the switch	45 G (Bop)
Release Point	Magnetic field required to deactivate the switch	-45 G (Brp)
Quiescent Current	Current consumed by the device when not active	7 渭A (Typical)
Output Current	Maximum current that can flow through the output	25 mA
Operating Temperature	Range of temperatures in which the device can operate	-40掳C to 85掳C
Package Type	Physical package used for the component	SOT-23
Lead Finish	Surface finish of the leads	Matte Tin

Instructions:

1. Power Supply Connection: Connect Vcc to a power supply within the operating voltage range and GND to the ground.
2. Magnetic Field Application: Apply a magnetic field greater than the sensitivity value (45 G) to activate the switch; remove the field or apply a field stronger than the release point (-45 G) to deactivate.
3. Output Handling: The digital output pin will go low when the switch is activated and high when deactivated. Ensure any connected circuitry can handle the specified output current.
4. Operating Environment: Ensure the device operates within the specified temperature range to avoid damage or unreliable operation.
5. Installation: Mount the device ensuring the leads are soldered correctly, respecting the lead finish material.

(For reference only)