Details

---

BUY HCPL-M452-000E https://www.utsource.net/itm/p/4497994.html
Small Outline, 5 Lead, High Speed Optocouplers

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	V_F	IF = 20 mA	1.1	1.3	1.5	V
Input Reverse Voltage	V_R				5	V
Input Current	I_F	V_F = 1.3V	10	20	30	mA
CTR (Current Transfer Ratio)	CTR	IF = 5 mA, V_CE(sat) = 5V	200	400	600	%
Output Collector-Emitter Saturation Voltage	V_CE(sat)	IC = 10 mA, IF = 5 mA	0.1	0.2	0.3	V
Output Collector-Emitter Breakdown Voltage	BV_CE	IC = 1 mA			70	V
Output Collector Leakage Current	I_CBO	VR = 25V			100	nA
Operating Temperature Range	T_op		-40		110	°C
Storage Temperature Range	T_stg		-55		150	°C

Instructions for HCPL-M452-000E:

1. Handling and Storage: Store the device in a dry, cool place to avoid moisture damage. Handle with care to prevent electrostatic discharge (ESD) damage.

2. Mounting: Ensure proper heat dissipation when mounting the device on a PCB. Avoid excessive mechanical stress on the leads during soldering.

3. Soldering: Use a temperature-controlled soldering iron not exceeding 300°C for no longer than 10 seconds per joint. Allow adequate cooling time between solder joints.

4. Electrical Connections: Ensure all electrical connections are secure and correctly wired according to the circuit diagram. Verify polarity before applying power.

5. Power Supply: Provide a stable power supply within the specified voltage range to ensure reliable operation. Use appropriate decoupling capacitors near the power pins.

6. Signal Integrity: Keep signal traces as short as possible to minimize noise pickup. Ground planes can help reduce noise and improve performance.

7. Testing: Before final assembly, test the device under typical operating conditions to verify correct functionality.

8. Environmental Considerations: Operate the device within its specified temperature range to avoid thermal damage. Ensure adequate ventilation if used in enclosed environments.

9. Safety Precautions: Follow all safety guidelines and regulations when handling and using the device. Avoid exposure to harmful substances and ensure proper disposal of any waste materials.

(For reference only)