Details

---

BUY IDT71024S15TYG https://www.utsource.net/itm/p/4538270.html
SRAM 1MBIT 15NS 32SOJ

Parameter	Description	Value
Part Number	Full part identifier	IDT71024S15TYG
Package Type	Encapsulation type	TQFP (Thin Quad Flat Package)
Pins	Number of pins	100
Operating Voltage	Supply voltage range	3.3V to 5.5V
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Clock Frequency	Maximum clock frequency	15 MHz
Data Width	Data bus width	24 bits
Memory Size	Total memory capacity	2 Mbits
Organization	Memory organization	128K x 16
Access Time	Time required for data access	55 ns
Power Consumption	Typical power consumption	200 mW
Standby Current	Current consumption in standby mode	20 渭A
Write Cycle Time	Time required for a write cycle	55 ns
Data Retention	Duration data is retained without power	10 years
Write Protect	Feature to prevent accidental writes	Software and Hardware options

Instructions:

1. Power Up Sequence: Ensure that the supply voltage is stable before applying any clock signals or initiating data transfers.
2. Initialization: After power-up, initialize the device by sending the reset command as specified in the datasheet.
3. Clock Signal: Use a stable clock signal within the specified frequency range to avoid data corruption.
4. Write Operations: Before performing any write operations, ensure that the write protect feature is disabled if necessary.
5. Data Access: Access data using the provided address lines and control signals. Ensure the access time is respected to maintain data integrity.
6. Power Down: When powering down, remove the clock signal first, then gradually reduce the supply voltage to avoid latch-up conditions.
7. Handling Precautions: Handle the component with care to avoid ESD damage. Use proper anti-static precautions when handling the IC.
8. Storage Conditions: Store in a dry environment to prevent moisture damage. Follow recommended storage practices to ensure longevity.

(For reference only)