Details

---

BUY INA138NA/250 https://www.utsource.net/itm/p/4543668.html
1 2 .... 10

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VS		-24		+80	V
Input Voltage Range	VI	Relative to Ground	-0.3		+75	V
Output Voltage Swing	VO	No Load, VS = 卤15V	-13		+13	V
Input Bias Current	IB	VIN = 0V	-5	0	+5	nA
Input Offset Voltage	VOS	TA = 25掳C	-2	0	+2	mV
Common-Mode Rejection Ratio	CMRR	f = 60Hz	90			dB
Power Supply Rejection Ratio	PSRR	f = 60Hz	90			dB
Bandwidth	BW	G = +1		1		MHz
Slew Rate	SR			0.3		V/渭s
Quiescent Current	IQ	VS = 卤15V		1.1		mA

Instructions for INA138NA/250:

1. Power Supply Connection: Connect the supply voltage (V_S) within the specified range of -24V to +80V.
2. Input Signal Handling: Ensure input signals stay within the input voltage range relative to ground (-0.3V to +75V).
3. Output Configuration: For optimal output performance, operate with no load or ensure the load does not restrict the output swing.
4. Bias and Offset Management: Be aware of the input bias current and offset voltage when designing circuits to minimize errors.
5. Noise Reduction: Utilize the high common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) for noise reduction in noisy environments.
6. Frequency Considerations: Operate within the bandwidth limit for accurate signal processing.
7. Current Management: Account for the quiescent current when considering power consumption in your design.
8. Handling Precautions: Handle with care to avoid damage; follow standard ESD protection practices.

(For reference only)