Details

---

BUY KDS122-RTK/P https://www.utsource.net/itm/p/4603269.html

Parameter	Description
Part Number	KDS122-RTK/P
Type	RTK GNSS Module
Frequency Bands	GPS L1, GLONASS L1, Galileo E1, BeiDou B1
Positioning Accuracy	< 10 cm (RTK)
Update Rate	Up to 20 Hz
Communication Interface	UART, USB, SPI, CAN
Operating Voltage	3.0 V to 5.5 V
Operating Temperature	-40掳C to +85掳C
Dimensions	45 mm x 45 mm x 10 mm
Weight	20 g
Antenna Type	External SMA connector

Instructions:

1. Power Supply: Connect the module to a power supply that provides a voltage between 3.0V and 5.5V.
2. Antenna Connection: Ensure the external antenna is properly connected via the SMA connector for optimal signal reception.
3. Interface Setup: Configure the communication interface as required (UART, USB, SPI, or CAN). Refer to the specific protocol documentation for setup instructions.
4. Firmware Update: Use the provided software tools to update the firmware if necessary. Follow the on-screen instructions during the update process.
5. Mounting: Secure the module in a location free from obstructions for the best satellite visibility.
6. Operation: Once powered and configured, the module will automatically begin acquiring satellite signals and outputting position data according to the set update rate.
7. Maintenance: Periodically check connections and ensure the operating environment remains within specified temperature ranges.

For detailed configuration and troubleshooting, refer to the user manual provided with the product.

(For reference only)