Details

---

BUY LTV356T https://www.utsource.net/itm/p/4624518.html
Phototransistor Output (no base connection )( 186.99

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	2.0	3.3	5.5	V	Operating supply voltage
Output High Voltage	VOH	-	VCC-0.4	VCC-0.1	V	Output high level voltage
Output Low Voltage	VOL	0.1	0.4	-	V	Output low level voltage
Propagation Delay	tPD	2.5	3.5	4.5	ns	Propagation delay time
Power Dissipation	PD	-	-	20	mW	Maximum power dissipation
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range

Instructions for LTV356T:

1. Power Supply Connection:

   • Connect the VCC pin to a stable power supply within the range of 2.0V to 5.5V.
   • Ensure that the GND pin is properly grounded.

2. Input Signals:

   • Apply input signals to the IN+ and IN- pins as required by your application.
   • Ensure that input voltages do not exceed the supply voltage (VCC).

3. Output Handling:

   • The output signal will be available on the OUT pin.
   • Verify that the load connected to the output does not exceed the maximum current capability of the device.

4. Propagation Delay Consideration:

   • Account for the propagation delay in timing-sensitive applications. The typical delay is around 3.5ns, but it can vary between 2.5ns and 4.5ns depending on operating conditions.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation limit of 20mW.
   • Avoid exceeding the maximum operating temperature of 85掳C.

6. Storage and Handling:

   • Store the device in a dry environment and handle with care to avoid damage from electrostatic discharge (ESD).

(For reference only)