Details

---

BUY MCP604T-I/ST https://www.utsource.net/itm/p/4676947.html
IC OPAMP GP 4 CIRCUIT 14TSSOP

Parameter	Value	Unit
Package Type	SOT-23-5	-
Operating Voltage	2.7 to 6.0	V
Supply Current (Max)	180	μA
Input Offset Voltage	±2.5	mV
Bandwidth (Unity Gain)	1.1	MHz
Slew Rate	0.4	V/μs
Common Mode Rejection Ratio (CMRR)	84	dB
Power Supply Rejection Ratio (PSRR)	90	dB
Output Swing	Within 25mV of either rail	V
Temperature Range	-40 to +125	°C

Instructions for MCP604T-I/ST

1. Power Supply:

   • Ensure the power supply voltage is within the range of 2.7V to 6.0V.
   • Use bypass capacitors (typically 0.1μF and 10μF) close to the power supply pins to minimize noise.

2. Input Signal:

   • Keep input signals within the common-mode input voltage range, typically from GND to VDD - 1.2V.
   • Avoid exceeding the maximum differential input voltage rating.

3. Output Load:

   • The output can drive loads directly but consider using a buffer for heavy load conditions or long traces.
   • Ensure the output swing meets the requirements of the connected circuitry.

4. PCB Layout:

   • Place the device in an area with minimal electromagnetic interference.
   • Maintain short leads and traces between the device and other components to reduce parasitic effects.

5. Storage and Handling:

   • Store in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge which can damage the sensitive internal circuits.

6. Application Considerations:

   • Ideal for low-power applications such as battery-operated devices.
   • Suitable for signal conditioning, sensor interfacing, and general-purpose analog signal processing.

(For reference only)