Details

---

BUY MCP6004-I/ST https://www.utsource.net/itm/p/4679776.html
1 MH, Low-Power Op Amp

Parameter	Description	Value
Package Type	The type of package used for the component	SOIC-8
Supply Voltage (VDD)	Operating voltage range	2.7V to 6V
Input Offset Voltage	Maximum input offset voltage at VDD = 5V, TA = 25°C	±1.5mV
Input Bias Current	Typical input bias current	±25pA
Input Impedance	Differential input impedance	10^12 Ω
Slew Rate	Slew rate	0.5V/μs
Bandwidth (-3dB)	Unity gain bandwidth	1MHz
Power Consumption	Supply current per amplifier	190μA
Common Mode Rejection Ratio (CMRR)	CMRR at DC, VDD = 5V, TA = 25°C	94dB
Power Supply Rejection Ratio (PSRR)	PSRR at 1kHz, VDD = 5V, TA = 25°C	95dB
Output Voltage Swing	Output voltage swing with RL = 10kΩ	±(VDD - 1.2V)
Operating Temperature Range	Range of temperatures over which device can operate	-40°C to +85°C

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range of 2.7V to 6V.
2. Installation: Place the MCP6004-I/ST in a SOIC-8 package on the PCB ensuring correct orientation.
3. Biasing and Input Protection: Consider using external resistors and capacitors for biasing and protection of inputs if necessary.
4. Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to reduce noise and transient effects.
5. Signal Handling: Be mindful of the input and output voltage limits to prevent damage or non-linear operation.
6. Temperature Considerations: Operate within the temperature range specified to ensure reliable performance.
7. Testing: After installation, test the circuit under various conditions to verify proper operation.

(For reference only)