Details

---

BUY MCP6002T-I/MS https://www.utsource.net/itm/p/4690216.html
1 MH, Low-Power Op Amp

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.8	-	6.0	V
Input Offset Voltage	VOS	Input	-	2.5	7.5	mV
Input Bias Current	IB	Input	-	20	-	pA
Input Offset Current	IOS	Input	-	2	-	pA
Common Mode Rejection	CMRR	@ f = 0.1 Hz	-	94	-	dB
Power Supply Rejection	PSRR	@ f = 1 kHz	-	90	-	dB
Slew Rate	SR	Small Signal	-	0.5	-	V/μs
Bandwidth (-3dB)	GBP	Small Signal	-	1.1	-	MHz
Quiescent Current	IQ	Per Amplifier	-	1.7	-	μA

Instructions for MCP6002T-I/MS

1. Supply Voltage: Ensure the supply voltage is within the range of 1.8V to 6.0V. This device operates on a single supply.

2. Input Signals: Be mindful of the input offset voltage, which can vary between 2.5mV and 7.5mV. Adjust your circuit design to accommodate this variance.

3. Bias and Offset Currents: The low input bias current (20pA typical) and input offset current (2pA typical) make this op-amp suitable for high impedance applications.

4. Common Mode and Power Supply Rejection: With a common mode rejection ratio (CMRR) of 94dB and power supply rejection ratio (PSRR) of 90dB, this device offers good noise immunity.

5. Slew Rate and Bandwidth: The slew rate is 0.5V/μs, and the gain-bandwidth product is 1.1MHz, making it suitable for general-purpose analog signal processing.

6. Power Consumption: Each amplifier has a quiescent current of 1.7μA, contributing to low power consumption, ideal for battery-operated devices.

7. Handling and Storage: Follow standard ESD precautions when handling the device. Store in original packaging until ready for use to prevent damage.

8. Mounting: Use appropriate mounting techniques to ensure reliable electrical connections and mechanical stability. Follow manufacturer guidelines for PCB layout recommendations.

9. Testing: Before integrating into final designs, test the device under actual operating conditions to ensure performance meets application requirements.

(For reference only)