Details

---

BUY LM158APT https://www.utsource.net/itm/p/4723409.html
OP-AMPDUALBIPOLARTSSOP8PINPLASTIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	-16		+16	V
Input Offset Voltage	VIO	VI+, VI- = 0V, TA = 25°C	-3	2	3	mV
Input Bias Current	IB	VI+, VI- = 0V, TA = 25°C	-50	80	250	nA
Input Offset Current	IO	VI+, VI- = 0V, TA = 25°C	-10	20	50	nA
Differential Input Voltage Range	VID	Continuous	-0.3		VCC+0.3	V
Common-Mode Rejection Ratio	CMRR	VI+, VI- = 0V, TA = 25°C	70	90		dB
Power Supply Rejection Ratio	PSRR	VCC = ±15V, TA = 25°C	80	100		dB
Slew Rate	SR	VOL to VOH, RL = 2kΩ		0.5		V/μs
Output Short-Circuit Duration	tSC	Continuous at any supply voltage				s

Instructions for Use:

1. Supply Voltage: The LM158APT can operate with a single supply voltage ranging from 3V to 32V or dual supplies up to ±16V.
2. Input Voltage: Ensure the differential input voltage does not exceed the supply voltages by more than 0.3V to avoid damage.
3. Bias and Offset Currents: These parameters are critical for precision applications. Compensation may be required for offset voltage in high-precision circuits.
4. Power Supply Rejection Ratio (PSRR): Higher PSRR indicates better immunity to power supply noise.
5. Common-Mode Rejection Ratio (CMRR): A higher CMRR means less sensitivity to common-mode signals, enhancing differential signal processing.
6. Slew Rate: This parameter limits the rate of change of the output voltage. It is important for AC signal processing.
7. Output Short-Circuit Protection: The device is protected against short circuits on the output, but continuous short-circuit conditions should be avoided to prevent overheating.

For detailed specifications and further information, refer to the official datasheet provided by the manufacturer.

(For reference only)