Details

---

BUY LT1013S8 https://www.utsource.net/itm/p/4778139.html

Parameter	Min	Typical	Max	Unit
Supply Voltage	2.7		36	V
Input Offset Voltage		0.5		mV
Input Bias Current		20		nA
Input Voltage Range	-0.3		Vcc+0.3	V
Slew Rate		0.5		V/渭s
Bandwidth (-3dB)		1.2		MHz
Output Swing			Vcc-1.5	V
Operating Temperature	-40		85	掳C

Instructions for LT1013S8:

1. Power Supply Connections:

   • Connect the positive supply pin to a voltage source between 2.7V and 36V.
   • Ensure the negative supply pin is connected to ground or a negative voltage if using a dual supply.

2. Input Signal Handling:

   • The input signals should remain within the specified input voltage range of -0.3V to Vcc + 0.3V.
   • Keep the input bias current in mind when designing input circuits, especially with high impedance sources.

3. Output Load Considerations:

   • The output can swing from approximately 0V to Vcc - 1.5V.
   • Ensure the load connected to the output does not exceed these limits to prevent distortion.

4. Thermal Management:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • For applications where the device might approach the upper limit, consider heat sinking or other cooling methods.

5. Stability and Compensation:

   • Given its bandwidth and slew rate, ensure proper compensation if used in feedback loops to maintain stability.

6. Handling Electrostatic Discharge (ESD):

   • Handle the component with care as it is sensitive to ESD; use appropriate precautions such as anti-static wrist straps and mats.

(For reference only)