Details

---

BUY LTC3851EUD#TRPBF https://www.utsource.net/itm/p/4814379.html
IC REG CTRLR BUCK 16QFN

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Range	4.5	-	60	V
Output Voltage	VOUT	Adjustable Range	0.8	-	55	V
Switching Frequency	fSW	Default Setting	-	300	1000	kHz
Current Limit	ILIM	Peak Inductor Current	-	20	40	A
Efficiency	η	Typical at 12VIN, 5VOUT, 1A	-	92	-	%
Quiescent Current	IQ	No Load	-	60	-	μA
Shutdown Current	ISD	VIN = 12V	-	1	-	μA
Operating Temperature	TOPR	Junction	-40	-	125	°C
Storage Temperature	TSTG	-	-65	-	150	°C

Instructions for Use

1. Power Supply Connection:

   • Connect the input voltage (VIN) within the operating range of 4.5V to 60V.
   • Ensure proper bypassing with ceramic capacitors close to the input pins.

2. Output Configuration:

   • Set the output voltage (VOUT) using external resistors according to the formula provided in the datasheet.
   • Verify the output voltage with a multimeter before connecting the load.

3. Frequency Adjustment:

   • Adjust the switching frequency (fSW) by selecting an appropriate resistor value for RT.
   • Verify the frequency setting with an oscilloscope if necessary.

4. Current Limit Setting:

   • Set the peak inductor current limit (ILIM) using the ILIM pin and external components as per the application requirements.
   • Monitor the current during operation to ensure it does not exceed the set limit.

5. Thermal Management:

   • Ensure adequate heat sinking or PCB copper area is provided to manage junction temperature (TOPR).
   • Keep the device within the specified operating temperature range.

6. Protection Features:

   • The device includes overcurrent protection, short-circuit protection, and thermal shutdown.
   • Test these features under controlled conditions to ensure proper operation.

7. Storage and Handling:

   • Store the device within the storage temperature range (-65°C to 150°C).
   • Handle with care to avoid damage from electrostatic discharge (ESD).

Refer to the detailed datasheet for more specific information and advanced configurations.

(For reference only)