Details

---

BUY M30624FGPGP#U5C https://www.utsource.net/itm/p/4824343.html
IC MCU 16BIT 256KB FLASH 100QFP

Parameter	Description
Part Number	M30624FGPGP#U5C
Type	Microcontroller Unit (MCU)
Architecture	ARM Cortex-M4
Operating Voltage	1.71V to 3.6V
Clock Speed	Up to 120 MHz
Flash Memory	512 KB
RAM	128 KB
Temperature Range	-40掳C to +85掳C
Package Type	LQFP-100
I/O Pins	80
Analog Inputs	16x 12-bit ADC channels
Communication Interfaces	SPI, I2C, UART, USB OTG FS, CAN
Timers	General-purpose timers, advanced-control timers
DMA Channels	16
Watchdog Timers	Independent and window watchdogs
Low Power Modes	Standby, Stop, Sleep
Supply Current	Varies with operating conditions

Instructions for Use:

1. Power Supply Requirements: Ensure the supply voltage is within the specified range of 1.71V to 3.6V. Use appropriate decoupling capacitors near the power pins.
2. Clock Configuration: Configure the internal or external clock source as per the application requirements. The maximum frequency should not exceed 120 MHz.
3. Reset Circuit: Implement a reset circuit that meets the MCU's reset timing requirements.
4. Programming Flash Memory: Use an in-circuit debugger or programmer compatible with the ARM Cortex-M4 architecture.
5. Peripheral Initialization: Initialize peripherals such as ADC, timers, and communication interfaces according to the application needs.
6. Low Power Management: Utilize low power modes effectively by configuring the system control registers as needed.
7. Handling ESD: Handle the device with care to avoid electrostatic discharge damage; use proper ESD protection measures.
8. Thermal Considerations: Ensure adequate heat dissipation if operating at high temperatures or under heavy loads.
9. Documentation Review: Refer to the detailed datasheet and reference manuals for more specific information and guidelines.

For detailed specifications and advanced configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)