Details

---

BUY MAX6705SKA-T https://www.utsource.net/itm/p/4859605.html
Low-Voltage, SOT23 P Supervisors with Power- Fail In/Out, Manual Reset, and Watchdog Timer

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	5.5	V
Supply Current	ICC	Quiescent	-	30	-	渭A
Input Voltage Range	VIN		0	-	VCC	V
Output Voltage Accuracy	VOUT	Load = 1 mA	-	卤1.5	-	%
Dropout Voltage	VDROPOUT	IOUT = 1 mA	-	260	-	mV
Shutdown Current	ISD		-	0.1	-	渭A
Output Current	IOUT	Continuous	-	100	-	mA

Instructions for MAX6705SKA-T

1. Power Supply Connection:

   • Connect the supply voltage (VCC) between 2.7V and 5.5V to the VCC pin.
   • Ensure a stable power supply to avoid fluctuations that can affect performance.

2. Ground Connection:

   • Connect the GND pin directly to the system ground to maintain proper operation.

3. Input Voltage:

   • The input voltage should be within the range of 0V to VCC. Exceeding these limits can damage the device.

4. Output Configuration:

   • The output voltage accuracy is 卤1.5% under a load current of 1 mA. Ensure the load does not exceed the continuous output current limit of 100 mA.

5. Dropout Voltage Consideration:

   • The dropout voltage is approximately 260 mV at an output current of 1 mA. Ensure the input voltage remains above the sum of the desired output voltage and dropout voltage.

6. Shutdown Functionality:

   • Utilize the shutdown feature by applying a logic low to the SHDN pin, which reduces the supply current to approximately 0.1 渭A.

7. Capacitor Selection:

   • Use appropriate input and output capacitors as specified in the datasheet to ensure stability and transient response.

8. Operating Temperature:

   • Ensure the operating environment temperature stays within the specified range to maintain reliable operation.

For detailed specifications and application notes, refer to the official Maxim Integrated datasheet for the MAX6705SKA-T.

(For reference only)