Details

---

BUY MAX3222EEUP+T https://www.utsource.net/itm/p/4871140.html
IC TRANSCEIVER FULL 2/2 20TSSOP

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating	3.0		5.5	V
Output Current (IOUT)	Per output driver		10		mA
Data Rate			20		kbps
Propagation Delay Time	TPLH, TPHL		7		渭s
Operating Temperature Range	Industrial	-40		85	掳C
Storage Temperature Range		-65		150	掳C
Input Current	High level, VIH		1		渭A
Input Current	Low level, VIL		1		渭A
Power-down Current			1		渭A
ESD Rating	Human body model			2	kV

Instructions for MAX3222EEUP+T:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 3.0V to 5.5V for proper operation.

2. Data Transmission:

   • The device supports data rates up to 20kbps. Ensure your application does not exceed this limit to avoid transmission errors.

3. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for industrial applications.
   • Store the device between -65掳C and 150掳C to prevent damage.

4. Input Signals:

   • Keep input currents at high levels (VIH) and low levels (VIL) below 1渭A to maintain reliable operation.

5. Power Management:

   • In power-down mode, the current consumption should be around 1渭A to conserve power effectively.

6. ESD Protection:

   • Handle with care as the device has an ESD rating of 2kV according to the human body model.

7. Driver Outputs:

   • Each output driver can provide up to 10mA of current. Ensure that connected loads do not exceed this limit to prevent damage.

8. Propagation Delay:

   • Account for a typical propagation delay of 7渭s when designing timing-sensitive circuits.

This table and set of instructions provide essential information for integrating the MAX3222EEUP+T into your electronic designs.

(For reference only)