Details

---

BUY MURF860 https://www.utsource.net/itm/p/4915637.html
Amp Isolation Super Fast Recovery Rectifier 50 to 400 Volts

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 8.0A, Tj = 25°C	-	1.1	1.4	V
Reverse Recovery Time	trr	IF = 8.0A, Tj = 25°C	-	35	50	ns
Peak Reverse Voltage	VRRM		60	-	-	V
RMS Voltage	VRMS		42	-	-	V
Average Rectified Current	IO	Tj ≤ 100°C	-	8	-	A
Surge Current	I FSM	Half-sine wave, 8.3ms	-	100	-	A

Instructions for MURF860

1. Mounting and Handling:

   • Handle the device with care to avoid damage to the leads and body.
   • Ensure that the mounting surface is clean and free from contaminants.

2. Soldering:

   • Use a soldering iron temperature not exceeding 260°C.
   • Soldering time should not exceed 10 seconds per joint.
   • Allow sufficient cooling time after soldering to prevent thermal shock.

3. Storage:

   • Store in a dry environment to prevent corrosion.
   • Keep away from direct sunlight and extreme temperatures.

4. Electrical Connections:

   • Ensure correct polarity when connecting the diode in the circuit.
   • Verify that the voltage and current ratings of the application do not exceed the device specifications.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near maximum current or voltage ratings.
   • Consider using heatsinks or other cooling methods if necessary.

6. Testing:

   • Test the device under specified conditions to ensure it meets performance criteria.
   • Use protective equipment during testing to avoid electrical hazards.

(For reference only)