Details

---

BUY NDT-03C https://www.utsource.net/itm/p/4934351.html
Specifications

Parameter	Description
Part Number	NDT-03C
Type	Non-Destructive Testing Device
Frequency Range	1 MHz to 20 MHz
Detection Method	Ultrasonic Pulse Echo
Display	LCD Screen
Power Supply	9V DC Battery
Operating Temp.	-10掳C to 50掳C
Dimensions	150mm x 75mm x 30mm
Weight	500g

Instructions for Use:

1. Power On: Press the power button to turn on the device. Ensure the battery is fully charged or replace if necessary.
2. Calibration: Before use, calibrate the device according to the manual settings provided in the user guide.
3. Select Mode: Choose the appropriate testing mode (e.g., thickness measurement, flaw detection) via the mode selection button.
4. Set Parameters: Adjust the frequency and other parameters using the control knobs based on the material and application.
5. Apply Couplant: Apply a suitable couplant on the surface of the material being tested to ensure effective ultrasonic transmission.
6. Conduct Test: Place the probe on the test area and observe the readings on the LCD screen.
7. Record Data: Note down or save the data as required.
8. Power Off: Turn off the device after use and store it in a dry place.

For detailed calibration procedures and troubleshooting, refer to the comprehensive user manual provided with the device.

(For reference only)