Details

---

BUY OP11GPZ https://www.utsource.net/itm/p/4967847.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	3		32	V
Input Offset Voltage	Vio	Initial		50		渭V
Input Bias Current	Iib	@ Vcc = 卤15V		4		nA
Input Offset Current	Iios	@ Vcc = 卤15V		0.6		nA
Open Loop Gain	Aol	@ Vcc = 卤15V, RL=10k惟		300		V/mV
Slew Rate	SR	@ Vcc = 卤15V		0.3		V/渭s
Bandwidth	f-3dB	Unity Gain		9		Hz
Output Short-Circuit Duration	tsc	Continuous				s

Instructions for OP11GPZ:

1. Power Supply:

   • Ensure the supply voltage is within the range of 3V to 32V.
   • Use appropriate decoupling capacitors close to the power supply pins to minimize noise and transient effects.

2. Input Signals:

   • Keep input signals within the common-mode input voltage range to avoid distortion or damage.
   • For optimal performance, ensure that the input bias current and input offset current are within specified limits.

3. Output Load:

   • The output can drive a load down to a short circuit, but ensure the short-circuit duration does not exceed the continuous rating.

4. Stability:

   • The amplifier is unity-gain stable. No external compensation is required for most applications.

5. Operating Temperature:

   • Operate the device within its specified temperature range to ensure reliable performance.

6. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD) damage. Use proper ESD protection practices during handling and assembly.

7. Mounting:

   • Follow manufacturer guidelines for PCB layout and mounting to ensure thermal and electrical performance.

8. Testing:

   • Perform initial testing under controlled conditions to validate operation before integrating into the final application.

(For reference only)