Details

---

BUY PCA9306IDCUR https://www.utsource.net/itm/p/4987455.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.5	-	5.5	V	Operating supply voltage range
Quiescent Current	IQ	-	20	-	渭A	Supply current without any load
Input Voltage Range	VIN	0	-	VDD	V	Valid input voltage range
Output Voltage Swing	VOUT	0	-	VDD	V	Output voltage swing
Propagation Delay (Low to High)	tPLH	-	7.5	-	ns	Propagation delay from low to high output
Propagation Delay (High to Low)	tPHL	-	7.5	-	ns	Propagation delay from high to low output
Maximum Data Rate	fMAX	-	-	400	MHz	Maximum data rate
ESD Protection	HBM	-	-	2	kV	Human Body Model ESD protection level

Instructions for Use:

1. Power Supply Connection: Connect the VDD pin to a power supply within the specified range of 1.5V to 5.5V. Ensure the GND pin is connected to the system ground.

2. Signal Input and Output: Connect your signal lines to the appropriate input and output pins. The device can operate with signals within the range of 0V to VDD.

3. Propagation Delay Consideration: Account for the propagation delays (tPLH and tPHL) in your timing calculations, especially if operating at higher frequencies.

4. Data Rate Limitations: Ensure that the maximum data rate does not exceed 400 MHz to avoid performance degradation or malfunction.

5. ESD Precautions: While the device has built-in ESD protection up to 2kV HBM, handle the device with care to prevent damage from static electricity.

6. Operating Environment: Ensure the device operates within recommended temperature and humidity ranges to maintain reliability and performance.

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed specifications and instructions.

(For reference only)