Details

---

BUY PTN3311D,118 https://www.utsource.net/itm/p/5024058.html
XLATR HS SERIAL LOGIC 8SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous operating voltage	2.7	-	5.5	V
Output Voltage	VOUT	Fixed output	-	3.3	-	V
Output Current	IOUT	Continuous	-	150	200	mA
Quiescent Current	IQ	VIN = 5V, no load	-	2	-	渭A
Dropout Voltage	VDROPOUT	IOUT = 150mA	-	280	-	mV
Power Supply Rejection Ratio	PSRR	@ 1kHz	-	65	-	dB
Operating Junction Temperature	Tj	Continuous operation	-40	-	125	掳C

Instructions for PTN3311D,118

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V to avoid damage or malfunction.

2. Output Voltage (VOUT):

   • The device provides a fixed output voltage of 3.3V. No external components are required for this setting.

3. Output Current (IOUT):

   • The maximum continuous output current is 200mA, with a typical value of 150mA. Do not exceed these limits to prevent overheating and potential failure.

4. Quiescent Current (IQ):

   • At no load and an input voltage of 5V, the quiescent current is typically 2渭A. This low current draw helps in minimizing power consumption.

5. Dropout Voltage (VDROPOUT):

   • With an output current of 150mA, the dropout voltage is typically 280mV. Keep this in mind when designing your circuit to ensure efficient operation.

6. Power Supply Rejection Ratio (PSRR):

   • The device offers a PSRR of 65dB at 1kHz, effectively filtering out ripple and noise from the input supply.

7. Operating Junction Temperature (Tj):

   • The operating junction temperature range is from -40掳C to 125掳C. Ensure proper thermal management to keep the device within this range.

8. Installation:

   • Follow standard surface mount technology (SMT) procedures for installation. Ensure good solder joints and verify correct orientation.

9. Application Considerations:

   • Use appropriate decoupling capacitors on both input and output to stabilize the voltage and reduce transient effects.
   • Place the device close to the load to minimize trace resistance and improve efficiency.

For detailed specifications and application notes, refer to the manufacturer's datasheet.

(For reference only)