Details

---

BUY RU3AM https://www.utsource.net/itm/p/5076204.html
Fast-Recovery Rectifier Diodes

Parameter	Description	Value
Part Number	Unique identifier for the component	RU3AM
Type	Category of the component	Surface Mount Relay
Coil Voltage	Voltage required to activate the relay	5V, 12V, 24V
Coil Current	Current consumed by the coil when activated	See Datasheet
Contact Form	Configuration of switch contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Insulation Resistance	Resistance between isolated circuits	>100M惟 at 500VDC
Dielectric Strength	Voltage withstand capability	2500VAC for 1 minute
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-40掳C to +125掳C
Weight	Mass of the component	1.5g

Instructions:

1. Installation: Ensure the relay is mounted on a PCB with appropriate soldering techniques. Follow the manufacturer's guidelines for soldering temperature and duration.
2. Power Supply: Connect the specified coil voltage to activate the relay. Verify the power supply matches the rated coil voltage.
3. Load Connection: Connect the load to the relay contacts ensuring it does not exceed the contact rating.
4. Testing: After installation, test the relay under operational conditions to ensure proper switching action.
5. Environmental Considerations: Operate within the specified temperature ranges to avoid damage or malfunction.
6. Handling: Handle with care to prevent physical damage. Avoid exposure to corrosive substances.
7. Compliance: Ensure the application complies with relevant safety standards and regulations.

(For reference only)