Details

---

BUY ST93CS46M1013TR https://www.utsource.net/itm/p/5089283.html
1K 64 x 16 SERIAL MICROWIRE EEPROM

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7		5.5	V
Standby Current	ISB	VDD = 2.7V to 5.5V		1		μA
Active Current	IAV	VDD = 2.7V to 5.5V		10		mA
Programming Current	IPGM	VPP = 12.5V, TPGM		4	8	mA
Programming Time	TPGM		1		10	ms
Erase Time	TERS		1		10	ms
Data Retention				10		years
Operating Temperature	TOPR		-40		85	°C
Storage Temperature	TSTG		-65		150	°C

Instructions:

1. Power Supply Requirements:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V for proper operation.

2. Current Consumption:

   • The device consumes a standby current (ISB) of approximately 1μA and an active current (IAV) of about 10mA.

3. Programming:

   • Apply a programming voltage (VPP) of 12.5V.
   • The programming current (IPGM) should be between 4mA and 8mA.
   • Programming time (TPGM) can vary from 1ms to 10ms.

4. Erase Operation:

   • Erase time (TERS) ranges from 1ms to 10ms.

5. Data Retention:

   • Data retention is guaranteed for at least 10 years under normal operating conditions.

6. Temperature Ranges:

   • Operating temperature (TOPR) ranges from -40°C to +85°C.
   • Storage temperature (TSTG) ranges from -65°C to +150°C.

7. Handling Precautions:

   • Follow standard ESD handling procedures to avoid damage to the device.
   • Ensure all power supply and signal lines are properly decoupled with capacitors close to the device for stable operation.

For detailed specifications and additional information, refer to the official STMicroelectronics datasheet for the ST93CS46M1013TR.

(For reference only)