Details

---

BUY SN65HVD75DR https://www.utsource.net/itm/p/5105679.html
3.3V-Supply RS-485 with IEC ESD Protection

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		3.0		5.5	V
Operating Temperature	Toper		-40		125	°C
Driver Output Low	VOL	IOL = 48 mA	0.4			V
Driver Output High	VOH	IOH = -24 mA		5.0		V
Input Threshold Voltage	VIT		1.0	1.5	2.0	V
Propagation Delay	tpd	Vcc = 5V		30		ns
Maximum Data Rate	fmax				50	Mbps
Standby Current	ISB	Vcc = 5V, no load		20		μA

Instructions for Use:

1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 3.0V to 5.5V.
2. Temperature Considerations: The device is designed to operate in environments ranging from -40°C to 125°C.
3. Signal Levels: Verify that input signals meet the input threshold voltage requirements to ensure proper logic level detection.
4. Propagation Delay: Account for a typical propagation delay of 30ns when designing timing-sensitive applications.
5. Data Rate: The maximum data rate supported by this device is up to 50 Mbps.
6. Standby Mode: When the device is not actively transmitting, it consumes approximately 20μA in standby mode.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)