Details

---

BUY S8MC-13-F https://www.utsource.net/itm/p/5106555.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	S8MC-13-F	-
Type	Component Type	Relay	-
Coil Voltage	Operating Voltage of the Coil	12	VDC
Coil Power	Power Consumption of the Coil	0.5	W
Contact Form	Configuration of Contacts	SPDT	-
Contact Rating	Maximum Current per Contact	10	A
Insulation Voltage	Dielectric Strength	1000	VAC
Operating Temperature	Temperature Range for Operation	-40 to +85	°C
Switching Capacity	Max Load Switching Capacity	10A @ 250VAC	-

Instructions:

1. Installation: Ensure the relay is mounted on a suitable surface that provides adequate ventilation and heat dissipation. Follow the manufacturer's guidelines for mounting.
2. Coil Connection: Connect the coil terminals to the appropriate power supply matching the rated coil voltage (12VDC). Verify polarity if applicable.
3. Contact Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to the circuit requirements. Ensure connections are secure to prevent arcing or poor contact.
4. Operational Testing: Before full deployment, test the relay under load conditions to ensure it operates correctly within specified parameters.
5. Maintenance: Periodically inspect the relay for signs of wear or damage. Clean contacts if necessary using approved methods.
6. Environmental Considerations: Operate the relay within the specified temperature range (-40°C to +85°C) to ensure reliable performance. Avoid exposure to excessive moisture or corrosive environments.

(For reference only)