Details

---

BUY SII9034CTU https://www.utsource.net/itm/p/5138072.html

Parameter	Description	Value	Unit
Operating Voltage (VCC)	Supply voltage range	2.7 to 3.6	V
Operating Temperature	Temperature range for operation	-40 to +85	°C
Output Data Rate	Maximum output data rate	1.5	Gbps
Power Consumption	Typical power consumption at full load	190	mW
Package Type	Encapsulation type	QFN-28
I2C Interface Speed	I2C interface speed	Up to 400	kbps
HDMI Version Support	Supported HDMI version	1.4
HDCP Support	High-bandwidth Digital Content Protection support	HDCP 1.4

Instructions for Using SII9034CTU:

1. Power Supply Connection:

   • Connect the VCC pin to a stable power supply within the operating voltage range of 2.7V to 3.6V.
   • Ensure that the ground (GND) is properly connected.

2. Signal Connections:

   • Connect the HDMI input and output ports as specified in the datasheet.
   • Verify that all signal lines are correctly wired according to the pinout diagram provided in the datasheet.

3. I2C Configuration:

   • Use the I2C interface to configure the device settings.
   • Ensure that the I2C bus operates at or below 400kHz for reliable communication.

4. HDCP Initialization:

   • If using HDCP, initialize the protocol through the appropriate commands via the I2C interface.
   • Follow the HDCP authentication process as outlined in the datasheet.

5. Testing and Validation:

   • After setup, test the HDMI signal integrity and functionality.
   • Validate that the output data rate meets the application requirements.

6. Environmental Considerations:

   • Operate the device within the specified temperature range (-40°C to +85°C).
   • Avoid exposing the component to environments with excessive moisture or corrosive substances.

7. Handling Precautions:

   • Handle the component with care to avoid damage to the pins or package.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)