Details

---

BUY SN74HC11ANSR https://www.utsource.net/itm/p/5171837.html

Parameter	Description	Value	Units
Logic Family	High-speed CMOS	HC	-
Supply Voltage (VCC)	Operating supply voltage	2 to 6	V
Input Voltage (VIH)	Input high-level voltage	VCC - 0.5	V
Input Voltage (VIL)	Input low-level voltage	0.5	V
Output Voltage (VOH)	Output high-level voltage	VCC - 0.1	V
Output Voltage (VOL)	Output low-level voltage	0.1	V
Propagation Delay Time	Typical propagation delay time	8	ns
Power Dissipation	Maximum power dissipation	100	mW
Operating Temperature	Operating temperature range	-40 to 85	°C
Package Type	Plastic small outline package	SOP	-

Instructions for SN74HC11ANSR

1. Supply Voltage Setup:

   • Ensure the supply voltage (VCC) is within the specified range of 2V to 6V.

2. Input Signal Levels:

   • For a logic high input, ensure the voltage is at least VCC - 0.5V.
   • For a logic low input, keep the voltage below 0.5V.

3. Output Signal Levels:

   • The output high level will be approximately VCC - 0.1V.
   • The output low level will be around 0.1V.

4. Propagation Delay:

   • Expect a typical propagation delay of 8 nanoseconds under standard operating conditions.

5. Power Management:

   • Do not exceed the maximum power dissipation of 100mW to avoid overheating and potential damage.

6. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.

7. Package Handling:

   • Handle the SOP package with care to prevent physical damage or short circuits.

8. Application Notes:

   • Refer to the manufacturer’s application notes for detailed guidance on specific applications and circuit design considerations.

(For reference only)