Details

---

BUY SS495A-SP https://www.utsource.net/itm/p/5196781.html
MINIATURE RATIOMETRIC LINEAR HALL EFFECT SENSOR

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7	-	5.5	V
Output Current	Iout	Continuous	-	100	250	mA
Quiescent Current	IQ	Vcc = 5V	-	40	-	渭A
Input Offset Voltage	Vos	Vcc = 5V	-	2	6	mV
Bandwidth	BW	Vcc = 5V, RL=1k惟	-	1	10	MHz
Slew Rate	SR	Vcc = 5V	-	1	3	V/渭s

Instructions for SS495A-SP

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) within the range of 2.7V to 5.5V.
   • Ensure a stable power supply to avoid erratic behavior.

2. Output Load:

   • The device can provide up to 250mA output current continuously. For optimal performance, ensure the load does not exceed 100mA.

3. Quiescent Current Consideration:

   • At a supply voltage of 5V, the quiescent current is typically 40渭A. Design your circuit considering this current consumption.

4. Input Signal Handling:

   • Be mindful of the input offset voltage, which can range from 2mV to 6mV at 5V supply. This may affect precision applications.

5. Frequency Response:

   • The bandwidth is typically around 1MHz with a load resistance of 1k惟. Adjust your signal frequency accordingly to stay within this range.

6. Slew Rate Limitations:

   • The slew rate is typically 1V/渭s. Ensure that the input signals do not require faster transitions to prevent distortion.

7. Handling and Storage:

   • Store in a dry environment and handle with care to avoid damage to the component.

8. Mounting and PCB Layout:

   • Follow standard practices for mounting surface-mount devices. Ensure proper thermal management if operating near maximum current or voltage limits.

(For reference only)