Details

---

BUY SRB-SH-112DM1 https://www.utsource.net/itm/p/5199384.html

Parameter	Description
Part Number	SRB-SH-112DM1
Type	Relay Module
Package Type	DIP (Dual Inline Package)
Number of Poles	1 Pole
Number of Throws	1 Throw
Contact Form	SPST (Single Pole, Single Throw)
Coil Voltage	5V DC
Coil Resistance	70惟
Contact Rating	10A at 250V AC
**Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-55掳C to +125掳C
Weight	3.5g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a suitable PCB or breadboard.
   • Observe correct polarity when connecting the coil terminals.

2. Operation:

   • Apply the rated coil voltage to activate the relay.
   • Verify that load current does not exceed the contact rating.

3. Handling:

   • Handle with care to avoid damage to pins and components.
   • Avoid exposure to extreme temperatures outside the specified range.

4. Testing:

   • Use a multimeter to check continuity across contacts in both states (energized and de-energized).
   • Test insulation resistance periodically to ensure safety.

5. Maintenance:

   • Clean with a soft, dry cloth; do not use solvents.
   • Inspect for any physical damage regularly.

(For reference only)