Details

---

BUY TMS320DRI350AZTS5 https://www.utsource.net/itm/p/5227945.html

Parameter	Description
Part Number	TMS320DRI350AZTS5
Manufacturer	Texas Instruments
Type	Digital Signal Processor (DSP)
Package Type	BGA
Pin Count	176
Operating Temperature	-40掳C to +85掳C
Core Voltage	1.2V
I/O Voltage	1.8V, 3.3V
Clock Speed	Up to 400 MHz
Memory	On-chip RAM: 128 KB, Flash: 1 MB
Interface	SPI, I2C, UART, CAN
DMA Channels	16
ADC Channels	8-bit, 12 channels
PWM Outputs	16
Peripheral Modules	Timers, Watchdog Timer, GPIO

Instructions for Use:

1. Power Supply Requirements: Ensure the core voltage is set to 1.2V and I/O voltages are correctly configured to either 1.8V or 3.3V depending on your application.
2. Clock Configuration: Configure the clock settings to match the desired operating frequency up to a maximum of 400 MHz.
3. Programming Interface: Use the JTAG interface for programming and debugging purposes.
4. Memory Initialization: Initialize the on-chip RAM and flash memory according to the datasheet specifications.
5. Peripheral Setup: Configure peripherals such as SPI, I2C, UART, and CAN based on your system requirements.
6. Thermal Management: Ensure adequate heat dissipation as per the thermal guidelines provided in the datasheet, especially when operating at higher frequencies.
7. Software Development: Utilize the available development tools and software libraries from Texas Instruments to facilitate coding and optimization.

For detailed specifications and further instructions, refer to the official Texas Instruments datasheet for the TMS320DRI350AZTS5.

(For reference only)