Details

---

BUY THC63LVD823B https://www.utsource.net/itm/p/5269619.html
160MHz 51Bits LVDS Transmitter

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.3		5.5	V
Output Voltage High	VOH	IO = -100 μA, VCC = 3.3V	2.4		3.3	V
Output Voltage Low	VOL	IO = 4 mA, VCC = 3.3V	0		0.4	V
Input Leakage Current	IIK	VIN = 0 to VCC	-1		1	μA
Propagation Delay Time	tpd	VCC = 3.3V, TA = 25°C	4.5		6.5	ns
Power Consumption	ICC	f = 0 Hz, VCC = 3.3V	1			μA

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.3V to 5.5V.

2. Input Signals:

   • Keep input signals within the range of 0V to VCC to avoid damage.
   • Be mindful of input leakage current, which can be up to ±1 μA.

3. Output Signals:

   • When operating at 3.3V, the output high level (VOH) should not exceed 3.3V and typically stays above 2.4V under specified load conditions.
   • The output low level (VOL) should remain below 0.4V when sinking 4 mA.

4. Propagation Delay:

   • Expect a propagation delay time (tpd) between 4.5 ns and 6.5 ns at room temperature and with a 3.3V supply.

5. Power Consumption:

   • At no switching frequency (f = 0 Hz), the device consumes approximately 1 μA.

6. Handling Precautions:

   • Handle the device with care to prevent electrostatic discharge (ESD) damage.
   • Ensure all connections are secure and correctly wired according to the pin configuration diagram provided in the datasheet.

7. Environmental Conditions:

   • Operate within recommended temperature ranges to ensure reliable performance.

For detailed specifications and further instructions, refer to the manufacturer's datasheet.

(For reference only)