Details

---

BUY THC63LVD104S https://www.utsource.net/itm/p/5269864.html
112MHz 30Bits Color LVDS Receiver

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	1.65	-	3.6	V
Output High-Level Voltage	VOH	IO = -0.4 mA			VCC-0.2	V
Output Low-Level Voltage	VOL	IO = 1.6 mA	0		0.2	V
Input Leakage Current	IIL	VI = 0 to VCC	-1		1	μA
Propagation Delay Time	tpd	VCC = 3.3V, Tamb = 25°C	3		5	ns
Power Consumption	ICC	VCC = 3.3V, f = 1 MHz		10		μA

Instructions for THC63LVD104S

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the specified range of 1.65V to 3.6V.
   • Use appropriate decoupling capacitors near the power pins to minimize noise and transient effects.

2. Input Signal Levels:

   • The input signals should be compatible with the supply voltage levels to avoid damage or incorrect operation.
   • Be cautious with signal integrity; use series termination resistors if necessary to match impedance.

3. Output Signal Levels:

   • Monitor output high (VOH) and low (VOL) levels under load conditions to ensure they meet the required thresholds for connected devices.

4. Propagation Delay:

   • Account for propagation delay (tpd) in timing-sensitive applications, especially at higher frequencies.

5. Power Consumption:

   • Consider the typical current consumption (ICC) when designing the power supply and thermal management aspects of your circuit.

6. Operating Temperature:

   • Ensure the device operates within the recommended temperature range to maintain reliability and performance.

7. Handling Precautions:

   • Handle the device with care to prevent electrostatic discharge (ESD) damage.
   • Follow standard anti-static precautions during assembly and handling.

8. Mounting and Layout:

   • Optimize PCB layout for signal integrity and thermal performance.
   • Keep signal traces as short as possible to reduce parasitic inductance and capacitance.

(For reference only)