Details

---

BUY TLP184(GB-TPL https://www.utsource.net/itm/p/5280558.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	1.0	1.2	1.4	V	IF = 20 mA
Peak Forward Current	IFSM	-	1.0	-	A	t = 1 ms, Repetition Rate = 1/10 Cycles
Reverse Breakdown Voltage	VRRM	5	-	70	V	-
Reverse Current	IR	-	100	-	μA	VR = 5 V
Output Collector-Emitter Saturation Voltage	VCE(sat)	-	0.2	0.3	V	IC = 5 mA, IF = 5 mA
Output Collector Current	IC	-	5	-	mA	VCE = 5 V
Isolation Voltage	VIORM	-	2500	-	Vrms	1 min, 50/60 Hz

Instructions for TLP184 (GB-TPL)

1. Mounting and Handling:

   • Handle the device carefully to avoid damage to leads.
   • Ensure proper alignment during mounting to prevent short circuits.

2. Power Supply Connection:

   • Connect the forward current supply ensuring it does not exceed the peak forward current rating.
   • Verify the reverse voltage applied does not surpass the reverse breakdown voltage limit.

3. Circuit Design Considerations:

   • Ensure that the circuit design allows for sufficient heat dissipation if operating at high currents or voltages.
   • Use appropriate decoupling capacitors near the power supply lines to reduce noise.

4. Testing:

   • During testing, apply voltages and currents within specified limits to avoid damaging the device.
   • Test the output collector-emitter saturation voltage under typical operating conditions to ensure correct operation.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready to use to prevent static damage.

6. Safety Precautions:

   • Always adhere to safety guidelines when working with electrical components.
   • Use protective equipment such as gloves and goggles when handling electronic components.

(For reference only)