Details

---

BUY TLE2062C https://www.utsource.net/itm/p/5280845.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.7		5.5	V
Input Offset Voltage	VIO	VCC=5V, TA=25°C	-0.4	0.1	0.4	mV
Input Bias Current	IB	VCC=5V, TA=25°C	-50	1	50	nA
Input Offset Current	IIO	VCC=5V, TA=25°C	-20	0.5	20	nA
Open Loop Gain	AVOL	VCC=5V, TA=25°C	100	300	500	kV/V
Slew Rate	SR	VCC=5V, TA=25°C	0.5		1	V/μs
Bandwidth	fT	VCC=5V, TA=25°C	1	1.6	2.5	MHz
Output Short-Circuit Duration	tSC	Continuous				s

Instructions for Using TLE2062C:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 2.7V to 5.5V.

2. Input Signals:

   • Keep input voltages within the common-mode input voltage range to avoid damage or incorrect operation.

3. Biasing and Decoupling:

   • Use appropriate decoupling capacitors near the power supply pins to stabilize the device and reduce noise.

4. Output Load:

   • The output can drive loads directly but should not be short-circuited for extended periods.

5. Operating Temperature:

   • Ensure the ambient temperature (T_A) remains within the operational limits specified by the manufacturer.

6. Handling Precautions:

   • Handle with care to prevent electrostatic discharge (ESD) damage; use proper ESD protection measures.

7. Mounting and Layout:

   • Follow recommended PCB layout guidelines to ensure optimal performance and reliability.

8. Testing:

   • When testing, apply typical operating conditions as closely as possible to those in actual use for accurate results.

(For reference only)