Details

---

BUY TLE2061CD https://www.utsource.net/itm/p/5280865.html
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE mPOWER OPERATIONAL AMPLIFIERS

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Continuous Mode	2.7	-	5.5	V
Input Offset Voltage	Vio		-	1	3	mV
Input Bias Current	Ib		-	0.1	0.5	nA
Input Offset Current	Iio		-	0.01	0.05	nA
Open Loop Gain	Aol		-	100	-	dB
Slew Rate	SR		-	0.4	-	V/μs
Bandwidth	f-3dB	Small Signal	-	1.1	-	MHz
Power Consumption	Pd	Quiescent, per Amplifier	-	180	-	μW
Common Mode Input Range	Vcm		Vee-0.1	-	Vcc+0.1	V
Output Swing	Vo	Load = 10 kΩ	Vee+0.2	-	Vcc-0.2	V

Instructions for Using TLE2061CD

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Connect the power supply correctly to avoid damage.

2. Input Connections:

   • Keep the input voltages within the common mode input range to prevent distortion or damage.
   • For optimal performance, ensure the input signals do not exceed the specified limits.

3. Output Configuration:

   • The output can swing close to the supply rails but not exactly at them. Consider this when designing circuits.
   • Use appropriate load resistances to match the output swing capabilities.

4. Biasing and Stability:

   • Pay attention to the input bias current and offset current to minimize errors in precision applications.
   • If necessary, use external compensation components to stabilize the amplifier in high-gain configurations.

5. Operating Temperature:

   • While not explicitly mentioned, ensure the device operates within its specified temperature range to maintain reliability.

6. Handling Precautions:

   • Handle with care to avoid static damage; the device is sensitive to ESD (Electrostatic Discharge).

For detailed specifications and application notes, refer to the official datasheet provided by the manufacturer.

(For reference only)