Details

---

BUY TS3USB31RSER https://www.utsource.net/itm/p/5333319.html
HIGH-SPEED USB 2.0 (480-Mbps) 1-PORT SWITCH WITH SINGLE ENABLE

Parameter	Description
Part Number	TS3USB31RSER
Function	USB 3.1 Gen 1 (SuperSpeed) Multiplexer/Demultiplexer
Channels	2 channels
Supply Voltage	1.8V to 3.6V
Operating Temperature	-40°C to +85°C
Package	TSSOP-16
Data Rate	Up to 5Gbps
ESD Protection	±8kV HBM, ±8kV IEC Contact, ±15kV IEC Air Gap
Propagation Delay	Max 75ps (typical)
Insertion Loss	Max -0.4dB @ 6GHz
Return Loss	Min 15dB @ 6GHz

Instructions for Use:

1. Power Supply Requirements: Ensure the supply voltage is within the specified range of 1.8V to 3.6V.
2. Signal Integrity: Maintain short PCB traces between the device and USB connectors to minimize signal degradation.
3. Decoupling Capacitors: Place decoupling capacitors as close as possible to the power pins of the device.
4. Grounding: Ensure a solid ground plane under the device to reduce noise and improve performance.
5. Thermal Management: If operating at high temperatures or in high-power applications, consider thermal vias to dissipate heat.
6. ESD Handling: Handle with care to avoid damage from electrostatic discharge; use appropriate ESD protection measures during handling and installation.
7. Multiplexing Configuration: Configure the multiplexer/demultiplexer according to your application needs using control lines provided in the datasheet.

For detailed specifications and additional information, refer to the manufacturer's datasheet.

(For reference only)