Details

---

BUY UCC27200DR https://www.utsource.net/itm/p/5344924.html
120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	4.5	-	18	V
Quiescent Current	IQ	-	20	-	渭A	VDD = 5V, TA = 25掳C
Propagation Delay	tpd	10	-	25	ns	VDD = 12V, RL = 1k惟
Rise Time	tr	-	6	-	ns	VDD = 12V, RL = 1k惟
Fall Time	tf	-	6	-	ns	VDD = 12V, RL = 1k惟
Maximum Output Current	IO_peak	-	3.5	-	A	VDD = 12V, Pulse Width = 50ns
Operating Temperature	Toper	-40	-	125	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for UCC27200DR

1. Power Supply Connection:

   • Connect the supply voltage (VDD) to a stable power source within the range of 4.5V to 18V.

2. Input Signal:

   • Apply the input signal to the IN pin. Ensure that the input signal is compatible with the operating voltage range of the device.

3. Output Load:

   • Connect the load to the OUT pin. The device can deliver peak currents up to 3.5A for short pulses. Ensure the load does not exceed these limits to avoid damage.

4. Thermal Considerations:

   • Operate the device within the temperature range of -40掳C to +125掳C. For extended reliability and performance, ensure adequate heat sinking if operating near maximum temperatures.

5. Handling Precautions:

   • Handle the device with care to prevent electrostatic discharge (ESD) damage. Use proper ESD protection equipment and practices.

6. Storage:

   • Store the device in an environment where temperatures do not exceed the storage temperature range (-65掳C to +150掳C).

7. Timing Characteristics:

   • Be aware of propagation delay, rise time, and fall time when designing circuits. These parameters affect the overall timing accuracy of your application.

8. Quiescent Current:

   • Monitor quiescent current especially in battery-powered applications to optimize power consumption.

9. Testing:

   • When testing the device, use typical conditions specified in the parameter table for accurate performance evaluation. Adjust test conditions as necessary for specific application requirements.

(For reference only)