Details

---

BUY V30200C https://www.utsource.net/itm/p/5378341.html
Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.526 V at IF = 5 A Vishay Siliconix 1 V30200C Dual High-Voltage Trench MOS Barrier Schottky Rectifier

Parameter	Description	Value
Part Number	Device Identifier	V30200C
Type	Type of Device	Hall Effect Sensor
Supply Voltage (VCC)	Operating Voltage Range	4.5 V to 24 V
Output Type	Output Configuration	Open Collector
Quiescent Current	Supply Current at No Load	8 mA max
Output Current	Maximum Continuous Output Current	25 mA
Operating Temperature	Temperature Range for Operation	-40掳C to 85掳C
Response Time	Time to Switch from Off to On	1 渭s max
Magnetic Sensitivity	Magnetic Field Strength to Activate	30 Gauss
Package Type	Enclosure Style	TO-92

Instructions:

1. Power Supply Connection: Connect the V30200C's VCC pin to a power supply within the operating voltage range of 4.5 V to 24 V. Ensure proper decoupling capacitors are used if necessary.
2. Ground Connection: Connect the GND pin to the common ground of your circuit.
3. Output Connection: Connect the output pin to your load or microcontroller input. Since it is an open collector output, you will need an external pull-up resistor to a suitable voltage level.
4. Installation and Mounting: Install the sensor in a location where it can effectively detect the magnetic field changes. Ensure that the ambient temperature does not exceed the specified operating temperature range.
5. Testing: Apply a magnetic field of at least 30 Gauss near the sensor to test its response. The output should switch from high impedance to low impedance (ground).
6. Handling Precautions: Handle with care to avoid damage. Avoid exposure to environments exceeding the specified temperature limits.

(For reference only)