Details

---

BUY W25Q32DWZPIG https://www.utsource.net/itm/p/5390688.html
1.8V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

Parameter	Description	Value
Device Type	Flash Memory	W25Q32DWZPIG
Interface	SPI	Single, Dual, Quad SPI
Memory Density	32 Mbit
Voltage - Supply	VCC (Operating)	1.71 V to 3.63 V
Clock Speed	Max Clock Frequency	104 MHz
Temperature	Operating Temperature	-40°C to +85°C
Package / Case	Package Type	SOIC-8, TSSOP-8
Pin Count	Number of Pins	8
Write Protection	Write Protect	Hardware & Software
Erase Sector Size	Sector Erase Size	4KB
Block Erase Size	Block Erase Size	64KB
Chip Erase Time	Chip Erase	30s max
Endurance	Write/Erase Cycles	100,000 cycles
Data Retention	Data Retention	20 years

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range (1.71 V to 3.63 V).
2. SPI Configuration: Configure the SPI interface according to your application needs (Single, Dual, or Quad SPI).
3. Clock Setup: Set the clock frequency up to a maximum of 104 MHz for optimal performance.
4. Temperature Considerations: Operate the device within the temperature range of -40°C to +85°C.
5. Write Protection: Utilize both hardware and software write protection features to prevent accidental data loss.
6. Programming: Follow the command set provided in the datasheet for read, write, erase, and other operations.
7. Erase Operations: Perform sector or block erases as needed, noting that a full chip erase can take up to 30 seconds.
8. Handling: Handle with care to avoid damage; follow ESD guidelines.

For detailed programming instructions and specific command sequences, refer to the device's datasheet.

(For reference only)