Details

---

BUY HCPL-2211-000E https://www.utsource.net/itm/p/5441904.html
Very High CMR, Wide VCC Logic Gate Optocouplers

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20 mA		1.2	1.6	V
Forward Current	IF	Continuous		20	50	mA
Reverse Voltage	VR	Maximum			5	V
Output High Voltage	VOH	IO = -1 mA, VDD = 5 V	4.2		5	V
Output Low Voltage	VOL	IO = 16 mA, VDD = 5 V	0	0.4		V
Propagation Delay Time	tPLH, tPHL	VDD = 5 V, IF = 20 mA, RL = 500 Ω		30	70	ns
Power Dissipation	PD	TA = 25°C			125	mW
Operating Temperature	TOPR		-40		85	°C

Instructions for HCPL-2211-000E

1. Power Supply:

   • Ensure the power supply voltage (VDD) is within the specified range to avoid damage to the device.

2. Forward Current:

   • Do not exceed the maximum forward current (IF) of 50 mA to prevent overheating and potential failure.

3. Reverse Voltage:

   • The device can withstand up to 5V reverse voltage but should ideally be operated under conditions where reverse voltage is minimized.

4. Output Configuration:

   • For reliable operation, ensure that the output load resistance (RL) is appropriate for the expected current levels.

5. Propagation Delay:

   • Be aware of the propagation delay when designing circuits that require precise timing.

6. Temperature Considerations:

   • Operate within the specified temperature range (-40°C to 85°C) to maintain performance and reliability.

7. Handling:

   • Handle with care to avoid static damage; use proper ESD precautions.

8. Mounting:

   • Ensure proper mounting and thermal management to dissipate heat effectively, especially if operating near maximum power dissipation.

(For reference only)