Details

---

BUY SN65LVDS93ADGGR https://www.utsource.net/itm/p/5454666.html
FLATLINK TRANSMITTER

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.25	-	3.6	V
Output Current	IOUT	Short-Circuit	-	-	24	mA
Differential Output Voltage	VOD	Operating	0.175	-	0.3	V
Common-Mode Output Voltage	VOCM	Operating	0.9	-	1.6	V
Propagation Delay	tPD	Load = 100Ω // 18pF	2.5	-	4.5	ns
Skew	tSKEW	Load = 100Ω // 18pF	-	-	0.5	ns
Input Current	IIH, IIL	Operating	-	-	±1	mA

Instructions for SN65LVDS93ADGGR:

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 2.25V to 3.6V.

2. Output Configuration:

   • The differential output voltage (VOD) should be maintained between 0.175V and 0.3V.
   • The common-mode output voltage (VOCM) should operate within 0.9V to 1.6V.

3. Signal Integrity:

   • To minimize signal skew, use matched impedance lines and keep propagation delay (tPD) under consideration when designing PCB traces.
   • Maintain load conditions as specified (e.g., 100Ω // 18pF) for accurate performance metrics.

4. Input Handling:

   • Ensure input currents (IIH, IIL) do not exceed ±1mA to avoid damaging the device.

5. Installation and Usage:

   • Follow standard ESD precautions during handling and installation.
   • Refer to the manufacturer’s datasheet for detailed application notes and specific circuit recommendations.

(For reference only)