Details
BUY XHP-6 https://www.utsource.net/itm/p/5459469.html
CONTACT (S), FEMALE , TWO PART BOARD CONNECTOR , CRIMP , RECEPTACLE
| Parameter | Description |
|---|---|
| Model | XHP-6 |
| Type | High Power LED Driver |
| Input Voltage | 100-240V AC, 50/60Hz |
| Output Voltage | Adjustable: 12V DC to 56V DC |
| Output Current | Max 6A |
| Efficiency | Up to 90% |
| Protection | Overvoltage, overcurrent, short circuit protection |
| Operating Temp. | -40掳C to +85掳C |
| Dimensions | 130mm x 70mm x 30mm |
| Weight | 350g |
Instructions:
- Installation: Ensure the driver is installed in a well-ventilated area to prevent overheating.
- Input Connection: Connect the input wires to a power source within the specified voltage range.
- Output Configuration: Adjust the output voltage as needed using the potentiometer provided on the driver.
- Load Connection: Connect your LED load to the output terminals ensuring polarity is correct.
- Operation: Turn on the power supply and check for proper operation of the LEDs.
- Safety Precautions: Do not exceed the maximum current or voltage ratings. Avoid direct contact with live components.
View more about XHP-6 on main site