Details

---

BUY OPA547FKTWTG https://www.utsource.net/itm/p/6232779.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		4.5	12	36	V
Quiescent Current	IQ	VS = 卤15V, RL = 10k惟		4.5		mA
Input Offset Voltage	Vos	VS = 卤15V	-0.5	0	0.5	mV
Input Bias Current	IB	VS = 卤15V, TA = 25掳C	-10	0	10	nA
Slew Rate	SR	VS = 卤15V	800			V/渭s
Large Signal Voltage Gain	AV	VS = 卤15V, f = 1kHz	70			dB
Output Short-Circuit Time	tsc	TO-247 package		100		ms
Operating Temperature Range	Toper		-40		125	掳C

Instructions for OPA547FKTWTG

1. Power Supply Connections:

   • Connect the supply voltage (Vcc) within the range of 4.5V to 36V.
   • Ensure proper decoupling capacitors are placed close to the power supply pins.

2. Input Signals:

   • Apply input signals considering the input offset voltage and bias current specifications.
   • Keep input signals within the common-mode voltage range to avoid distortion.

3. Output Configuration:

   • For optimal performance, connect a load resistor (RL) as specified in the quiescent current test conditions.
   • Be cautious not to exceed the maximum output short-circuit time to prevent damage.

4. Thermal Management:

   • Operate within the temperature range of -40掳C to 125掳C.
   • Ensure adequate heat dissipation, especially when operating at higher supply voltages or under heavy loads.

5. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD).
   • Follow standard safety procedures when working with electronic components.

For detailed application notes and further information, refer to the manufacturer's datasheet.

(For reference only)