Details

---

BUY CY7C292A-50PC https://www.utsource.net/itm/p/6249681.html

Parameter	Description	Value
Package Type	The type of packaging used for the component.	48-Pin PLCC
Operating Temperature	The range of temperatures in which the device can operate reliably.	-40掳C to 85掳C
Supply Voltage	The voltage range required to power the device.	3.3V
Access Time	Time it takes for the memory to respond to a read or write command.	50ns
Data Width	The number of bits that can be transferred in parallel.	8-bit
Memory Size	Total amount of storage available on the device.	16K x 8
Organization	How the memory is organized internally.	16K x 8
Standby Current	Current consumed by the device when in standby mode.	2渭A
Active Current	Current consumed by the device during active operation.	75mA
Power-down Mode	Feature that allows the device to enter a low-power state.	Yes
Write Cycle Time	Time required to complete a write cycle.	150ns
CAS Latency	Number of clock cycles delay from when a column address is strobed until data is available.	NA
RAS-to-CAS Delay	Minimum time between activating a row and accessing a column.	NA
Refresh Rate	Frequency at which DRAM must be refreshed to maintain data integrity.	NA

Instructions:

1. Power Supply: Ensure the CY7C292A-50PC is powered with a stable 3.3V supply.
2. Installation: Carefully insert the device into a 48-pin PLCC socket ensuring correct orientation.
3. Operating Environment: Operate within the temperature range of -40掳C to 85掳C to ensure reliable performance.
4. Timing Requirements: Adhere to specified access times and write cycle times to prevent data corruption.
5. Low Power Usage: Utilize the power-down mode feature to reduce power consumption when the device is not in use.
6. Data Handling: Manage data width and memory organization according to your system's requirements, noting the 8-bit data bus and 16K x 8 memory size.
7. Standby Mode: When not actively using the device, switch to standby mode to minimize current draw.

Note: Parameters like CAS Latency, RAS-to-CAS Delay, and Refresh Rate are not applicable as this device does not have these features typical of DRAM devices.

(For reference only)